SuperServer Automation Assistant (SAA) UEFI Release Notes ================================================== Software Release Version: V1.1.0-p2 Release Date: 2024/10/30 Introduction ============ The SuperServer Automation Assistant (SAA) UEFI can be used to manage the system BIOS, BMC and CPLD firmware image update for select systems under EFI shell. To update DMI information, users can edit DMI information from readable text file, as well as use SAA to apply DMI information. Requirements ============ @In-Band Usage - Managed System * Operating system: EFI shell * Hardware: X12/H12 and later platforms except H12 non-RoT systems Known Limitation ================ 1. System will be powered off during BIOS update on X12/H12 RoT platforms if the BMC and CPLD firmware does not support BIOS update without power off. Version History =============== V1.1.0-p2 (2024/10/30) ========================= 1. Enhancement : UpdateBmc and UpdateBios command support R12/R13 latest BMC firmware Redfish API design. 2. Enhancement : Extend BIOS update timeout for G1/G2 systems. 3. Enhancement : GetEventLog support --info option for OpenBMC. 4. Enhancement : Enhance the not supported error message when executing command ClearMaintenEventLog on R12/R13. 5. Fix : Extend the waiting time for recovering BIOS on G2DMH to 24 minutes for BiosRotManage command. V1.1.0-p1 (2024/09/20) ========================= 1. New Feature : Support Oberon GB200 DC SCM RoT2.0 AST2600 OpenBMC. 2. Fix : Fix the failure to find correct Redfish Host Interface IP on GH200 system for GetGpuInfo command. 3. Fix : Fix X14 motherboard CPLD jed files information parsing error. 4. Fix : Fix the getting link status for BmcLanManage command on R13. V1.1.0 (2024/08/29) ========================= 1. New Feature : Support X14 AST2600 Delta Next DCSCM ROT2-HW2 OpenBMC. 2. New Feature : Support X14 AST2600 nonROT OpenBMC. 3. New Feature : Support H14 AST2600 RoT 2.0 systems. 4. New Feature : Support X14 AST2600 ROT2-HW2 OpenBMC with SAS3 Expander. 5. New Feature : Add support for Nvidia Grace platform. 6. New Feature : Add GetMotherboardFpgaInfo and UpdateMotherboardFpga commands to support motherboard FPGA firmware management. 7. New Feature : Add GetAomboardCpldInfo and UpdateAomboardCpld commands to support CPLD firmware management on the AOM board. 8. New Feature : Add RestoreFruInfo command to restore FRU information. 9. New Feature : Add GetLockdownMode command to get the lockdown status from the managed system. 10.New Feature : Add CheckSelfTest command to check and report the basic health status of the BMC. 11.New Feature : Add GetEventLog and ClearEventLog commands to support event log management. 12.New Feature : Add GetMaintenEventLog and ClearMaintenEventLog commands to support maintenance event log management. 13.New Feature : Support new actions Delete, GetVer and SetVer to delete SDR ID, get SDR version and set SDR version separately for CheckSensorData command. 14.New Feature : Add TpInfo command to manage the multi-node information. 15.New Feature : Add BmcHostname command to manage BMC hostname. 16.New Feature : Add LoadDefaultBmcCfg command to load the default factory BMC configuration. 17.New Feature : Add GetPsFruInfo command to get FRU information of power supply from the managed system. 18.New Feature : Add GetPsuInfo command to get PSU information from the managed system. 19.New Feature : Support runtime update golden and recover BIOS on supported platforms for BiosRotManage command. 20.Enhancement : Enhance -I Redfish_HI command mode stability. 21.Enhancement : Enhance general command stability. 22.Enhancement : Support action GetLinkStatus to get link status information for BmcLanManage command. 23.Fix : GetBiosInfo command could display an incorrect BIOS version from R12/R13 platform with the latest BMC firmware. 24.Fix : System hang when executing ChangeFruInfo and RestoreFruInfo commands on R13SPD. V1.0.0 (2024/05/22) ========================= Initial release of SAA, formerly known as SUM. 1. New Feature : Support X14/B14/H14 ROT2.0 AST2600 systems. 2. New Feature : Support X14/H14 ROT2.0 OpenBMC AST2600 systems. 3. New Feature : Support X14 GD3 ROT2.0 AST2600 system. 4. New Feature : Support AOM SCM OpenBMC AST2600 system. 5. New Feature : Support X13/H13 OpenBMC AST2600 systems. 6. New Feature : Support X13 ROT2.0 AST2600 system. 7. New Feature : Support H13 AST2600 ROT2.0 Delta Next systems. 8. New Feature : Support H13SRA-F/TF systems. 9. New Feature : Support H12 with CPLD RoT1.0+ systems. 10.New Feature : Support AST2500 JBOF systems. 11.New Feature : Support non-RoT SSE with AST2600. 12.New Feature : Support ARM64 architecture. 13.New Feature : Support UpdateCpld command for X13/H13 Non-RoT systems. 14.New Feature : Add scripts to activate and deactivate Redfish Host Interface. 15.New Feature : Support BmcLanManage command to manage BMC LAN configuration. 16.New Feature : Add CpldRotManage command for CPLD RoT FW management. 17.New Feature : Add GetSwitchBoardCpldInfo and UpdateSwitchBoardCpld commands to support multiple CPLD management on switch boards for X13 Delta Next systems. 18.New Feature : Add GetFanBoardCpldInfo and UpdateFanBoardCpld commands to support multiple CPLD management on FAN boards for X13 Delta Next systems. 19.New Feature : Add GetBackplaneCpldInfo and UpdateBackplaneCpld commands to support NVMe backplane CPLD management. 20.New Feature : Add multiple motherboard CPLD support for GetCpldInfo and UpdateCpld commands for CPLD management for X13 Delta Next systems. 21.New Feature : Support GetGpuInfo and UpdateGpu commands on H100 and MI300X systems. 22.New Feature : Support BmcReset command to reset BMC system. 23.New Feature : Support UpdateBios command on X13SAW ClientME systems. 24.New Feature : Support ChassisIntrusion command to get chassis status. 25.New Feature : Support GetFruInfo command to get FRU information. 26.New Feature : Support ChangeFruInfo command to change FRU information. 27.New Feature : Support CheckSensorData command to list sensor status. 28.New Feature : GetBiosInfo command supports identifying Siena & Bergamo AMD CPU. 29.New Feature : Add BIOS user default support for UpdateBios command. 30.New Feature : Support GetSystemInfo command to get system information. 31.Enhancement : Support TLSv1.2 ECDHE cipher suite. 32.Enhancement : Upgrade openssl 1.1.0i. 33.Enhancement : Enhance new redfish API support for GetBackplaneCpldInfo and UpdateBackplaneCpld commands. 34.Fix : Support GetBiosInfo and UpdateBios commands on X13/H13 OpenBMC systems. 35.Fix : Support GetBmcInfo and UpdateBmc commands on X13/H13 OpenBMC systems. Technical Support ================= Web Site: www.supermicro.com Headquarters: support@supermicro.com European Branch: support@supermicro.nl Asian Branch: support@supermicro.com.tw